Guide
Grain store building costs: the shell and everything after it
Updated
The building is the part of a grain store with a published price. Its retaining walls, floor, aeration and drier have none in public, and usually cost the most.
What a grain storage building shell costs
Steel building suppliers publish guide prices for the frame and cladding. Midbrook Steel Buildings lists 2026 guide prices for agricultural steel buildings, supply and installation of the building only, excluding VAT, groundworks, foundations, drainage and fit-out. Its single skin examples work out as follows.
| Size (width × length × eaves) | Floor area | Guide price | Per m² (our arithmetic) |
|---|---|---|---|
| 7.5 m × 13.5 m × 3.5 m | 101.25 m² | £40,000 | £395 |
| 15 m × 15 m × 4 m | 225 m² | £63,500 | £282 |
| 25 m × 20 m × 5 m | 500 m² | £168,000 | £336 |
| 36 m × 40 m × 4 m | 1440 m² | £292,500 | £203 |
Larger buildings cost less per square metre because design, transport and erection costs spread over more floor. Atlantic Steel Buildings gives these figures:
- a structural portal frame alone at about £114–£178 per m²;
- a supplied steel building kit, with cladding, doors and guttering, at around £200–£250 per m²;
- a completed building at several hundred pounds per m² once foundations, slab and erection are in.
Grain buildings cost more than a general shed
- Retaining walls. Bulk grain pushes sideways on the walls, so a grain store needs walls and a frame designed for that load, usually precast concrete panels to the grain depth. A frame designed for machinery or straw is not.
- The floor. A sound, level slab, with in-floor ducts or space for laid-on ducts, and an apron for lorries. Groundworks are usually the largest single line on a new store and the one that varies most between sites.
- Aeration. Ducts, fans and controls sized to hit AHDB's cooling targets, below 15°C within two weeks of harvest and below 5°C by the end of December (AHDB).
- Drying and handling. A drier, intake pit, conveyors and cleaner are quoted separately and can match the building in cost. See grain drying costs.
- Proofing and hygiene. Bird and rodent proofing built in at the start, because Red Tractor assurance expects it of a loaded store. See store hygiene and Red Tractor.
Grain storage building cost per tonne
No supplier we read publishes a finished grain store price per tonne of capacity, and we do not invent one. The same tonnage costs very different sums as an adapted shed with laid-on ducts and as a new portal frame with concrete walls, a drier and a weighbridge.
To compare quotes, ask each supplier for the price at your tonnage and the grain depth it assumes. Have groundworks, walls, ventilation and drying shown as separate lines.
- Fix the tonnage and the grain depth you need, and how many separate parcels you must keep apart. That decides the footprint and whether a floor store, silos or bins suit you.
- Get the building quoted on its own, with the wall height and the grain pressure it is designed for written into the quote.
- Get groundworks quoted separately, with a stated allowance for what is found under the topsoil.
- Ask the planning question early. Whether a new store needs full planning permission or only prior notification under agricultural permitted development depends on the holding and on the building's size and siting; your local planning authority will say which.
Shell prices are suppliers' own published guides, read on 30 October 2026. They are not a quote for your site. Get quotes at your tonnage from UK grain store suppliers.